Today I have undertaken surgery on my original MX Ergo to replace the switches which had become a little trigger happy.
I'm pleased to announce the surgery has been a complete success. The original Omron switches have been removed and replaced with higher quality Kalih GM 8.0 switches which are quieter and will last much longer.
The patient is now fully recovered and back to work.
The site might be down for a while from the 15th depending on how much the phone company fuck up switching me to a new internet provider. Hopefully it all goes smoothly and you won't notice anything... ...but past experiences suggest it could be a bumpy ride.
It's normal for the DPC (Damp Proof Course) to be above floor level with a solid (Concrete) floor but with a suspended wooden floor it should be below the joists, not above!
This is the damp problem in my new house I have to fix. It's very unusual, in the UK at least, to have suspended wooden floor and solid on the ground floor level of a house. This is why the DPC is wrong for the timber floor side. The reason my house is like this is because it's built on a hill and they clearly couldn't be bothered with getting lots of infill to do all solid floors.
I will have to replace the floor joists and fit them on hangers instead of fitting them in to the brickwork. I will also be adding tanking (a cement based slurry) that will waterproof the brickwork from the DPC down to just below the joists which will protect them from moisture in the brickwork. I'll insulate between the joists too. Hopefully the existing floorboards can be reused.
On the concrete & tile side I'll take up the tile and paint a damp proof membrane (DPM) on to the surface and up the wall to the DPC. I'll then add a thin insulating board and thin tiles on top.